Skip header
 

Configuring the SNMP Settings

Click the [SNMP] tab on the network settings page to configure the SNMP settings.

Web browser screen illustration

SNMP

Item

Description

SNMP

Select whether to enable the machine to use SNMP services.

Trap

Item

Description

Target Trap

Select whether to enable the machine to send traps to the management host (NMS).

When disabled, [SNMP Management Host 1] and [SNMP Management Host 2] below become unavailable.

SNMP Management Host 1

Enter the IP address or host name of a management host. Can contain up to 64 characters.

SNMP Management Host 2

Enter the IP address or host name of a management host. Can contain up to 64 characters.

Community

Item

Description

Get Community

Enter the community name to use for authentication of Get requests. Can contain up to 32 characters.

Trap Community

Enter the community name to use for authentication of Trap requests. Can contain up to 32 characters.

System

Item

Description

Location

Enter the location of the machine. The location entered here is displayed on the main page. Can contain up to 64 characters.

Contact

Enter the contact information of the machine. The contact information entered here is displayed on the main page. Can contain up to 64 characters.