Skip header
 

The Screen in Fax Mode

This section provides information about the screen in fax mode.

By default, the display shows the copier screen when the machine is turned on.

If the copy or scanner screen is shown on the display, press the [Facsimile] key on the control panel to switch to the fax screen.

Facsimile key illustration

Screen in standby mode

Operation panel screen illustration numbered callout illustration

  1. Current status or messages

    Displays the current status or messages.

  2. Current settings

    Displays the current density and resolution settings.

  3. Selection key items

    Displays the functions you can use by pressing the corresponding selection keys.

  4. Current date and time

    Shows the current date and time.

Note

  • The machine's default mode at power on can be specified in the [Function Priority] setting under [Admin. Tools].

  • The display format for time and date can be specified in [Set Date/Time] under [Admin. Tools].

  • If LDAP authentication is specified, you must first log in to the machine by entering a user name and password.

Reference