Skip header
 

Assigning the machine's IPv4 address manually

Important

  • The IPv4 address assigned to the machine must not be used by any other device on the same network.

1Press the [User Tools] key.

User Tools key illustration

2Press the [Up arrow key] [Down arrow key] keys to select [Network Settings], and then press the [OK] key.

3If you are requested to enter a password, enter the password using the number keys, and then press the [OK] key.

4Press the [Up arrow key] [Down arrow key] keys to select [IPv4 Configuration], and then press the [OK] key.

5Press the [Up arrow key] [Down arrow key] keys to select [DHCP], and then press the [OK] key.

6Press the [Up arrow key] [Down arrow key] keys to select [Inactive], and then press the [OK] key.

7Press the [Up arrow key] [Down arrow key] keys to select [IP Address], and then press the [OK] key.

The current IPv4 address is shown.

8Enter the machine’s IPv4 address using the number keys, and then press the [OK] key.

Press the [Left arrow key] [Right arrow key] keys to move between fields.

9Press the [Up arrow key] [Down arrow key] keys to select [Subnet Mask], and then press the [OK] key.

The current subnet mask is shown.

10Enter the subnet mask using the number keys, and then press the [OK] key.

Press the [Left arrow key] [Right arrow key] keys to move between fields.

11Press the [Up arrow key] [Down arrow key] keys to select [Gateway Address], and then press the [OK] key.

The current gateway address is shown.

12Enter the gateway address using the number keys, and then press the [OK] key.

Press the [Left arrow key] [Right arrow key] keys to move between fields.

13Press the [User Tools] key to return to the initial screen.

14If you are requested to restart the machine, turn off the machine, and then turn it back on.

15Print the configuration page to confirm the setting.

The IPv4 address setting will appear under “TCP/IP” on the configuration page.

Note

  • You can press the [Escape] key to exit to the previous level of the menu tree.

  • A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock].

  • If your network environment requires a specific transmission speed that is not automatically detected, set the transmission speed in [Set Ethernet Speed] under [Network Settings].

  • When [DHCP] is activated, manually configured IPv4 address settings are not used.

Reference