Skip header
 

Top Page > Software Guide > Appendix > Transmission Using IPsec > Enabling and Disabling IPsec Using the Control Panel

Enabling and Disabling IPsec Using the Control Panel

1Press the [Menu] key.

2Press the [Up arrow key][Down arrow key] keys to select [Host Interface], and then press the [OK] key.

3Press the [Up arrow key][Down arrow key] keys to select [Network Setting], and then press the [OK] key.

4Press the [Up arrow key][Down arrow key] keys to select [IPsec], and then press the [OK] key.

5Press the [Up arrow key][Down arrow key] keys to select [On] or [Off], and then press the [OK] key.

6Press the [Menu] key to return to the initial screen.

Note

  • You can press the [Escape] key to exit to the previous level of the menu tree.