Top Page > Software Guide > Monitoring and Configuring the Printer > Configuring the Network Settings > Configuring the SNMP Settings

Configuring the SNMP Settings

Click the [SNMP] tab on the network settings page to configure the SNMP settings.

Web browser screen illustration

SNMP
Item	Description
SNMP	Select whether to enable the printer to use SNMP services.

Trap
Item	Description
Target Trap	Select whether to enable the printer to send traps to the management host (NMS). When set to [Inactive], [SNMP Management Host 1] and [SNMP Management Host 2] below become unavailable.
SNMP Management Host 1	Enter the IP address or host name of a management host. Can contain up to 64 characters.
SNMP Management Host 2	Enter the IP address or host name of a management host. Can contain up to 64 characters.

Community
Item	Description
Get Community	Enter the community name to use for authentication of Get requests. Can contain up to 32 characters.
Trap Community	Enter the community name to use for authentication of Trap requests. Can contain up to 32 characters.

System
Item	Description
Location	Enter the location of the printer. The location entered here is displayed on the main page. Can contain up to 64 characters.
Contact	Enter the contact information of the printer. The contact information entered here is displayed on the main page. Can contain up to 64 characters.