Skip header
 

Changing the System Menu

Use the following procedure to change the settings for Energy Saver 2 timer.

1Press the [Menu] key.

Menu key illustration

The menu screen appears.

2Press the [Up arrow key][Down arrow key] keys to select [System], and then press the [OK] key.

3Press the [Up arrow key][Down arrow key] keys to select [Energy Saver 2], and then press the [OK] key twice.

4Press the [Up arrow key][Down arrow key] keys to select [On], and then press the [OK] key.

5Press the [Up arrow key][Down arrow key] keys to select [E.Saver2 Timer], and then press the [OK] key.

6Specify the lead time needed to switch to the Energy Saver mode using [Up arrow key][Down arrow key] keys.

7Press the [OK] key.

The selected lead time is displayed for two seconds with an asterisk, and then the [Energy Saver 2] screen appears.

8Press the [Menu] key to return to the initial screen.