Moving over a Short Distance
Do not remove the print cartridge when moving the printer.
Be sure to check the following points:
The power switch is turned off.
The power cable is unplugged from the wall outlet.
The interface cable is unplugged from the printer.
If Tray 2 is installed, remove it.
Lift the printer by using the inset grips on both sides of the printer, and then move it horizontally to the place where you want to use it.
If you have removed Tray 2, reinstall it.
Be sure to move the printer horizontally. To prevent toner from scattering, move the printer carefully.
