Skip header
 

Top Page > Hardware Guide > Paper and Other Media > Loading Paper > Loading Paper in Tray 1 > Specifying custom size paper for Tray 1

Specifying custom size paper for Tray 1

Important

  • When printing on custom size paper, specify the paper size using the control panel or printer driver.

  • Paper sizes between 100 - 216 mm (3.94 - 8.50 inch) in width and 148 - 356 mm (5.83 – 14.02 inch) in length can be loaded in the tray 1.

  • The printer cannot print from applications that do not support custom size paper.

1Press the [Menu] key.

Menu key illustration

2Press the [Up arrow key] or [Down arrow key] key to display [Paper Input], and then press the [OK] key.

Menu:               
 Paper Input        

3Press the [Up arrow key] or [Down arrow key] key to display [Paper Size], and then press the [OK] key.

Paper Input:        
 Paper Size         

4Press the [Up arrow key] or [Down arrow key] key to display [Tray 1 Ppr Size], and then press the [OK] key.

Paper Size:         
 Tray 1 Ppr Size    

In this example, [Tray 1] is selected.

5Press the [Up arrow key] or [Down arrow key] key to display [Custom Size], and then press the [OK] key.

Tray 1 Ppr Size:    
 Custom Size        

6Press the [Up arrow key] or [Down arrow key] key to select a unit, and then press the [OK] key.

Custom Size:        
 mm                 

7Press the [Up arrow key] or [Down arrow key] key to enter the horizontal value, and then press the [OK] key.

Custom Size:        
Horiz. 216 mm       

8Press the [Up arrow key] or [Down arrow key] key to enter the vertical value, and then press the [OK] key.

Custom Size:        
Vert. 356 mm        

9Press the [Menu] key.

Note

  • If the [Auto Continue] setting under [System] is enabled, the printer ignores the paper type and size settings and prints on whatever paper is loaded. Printing stops temporarily when the error is detected, and restarts automatically after about ten seconds using the settings made on the control panel.