Before performing this procedure, refer to Preparation for Sending by Scan to Folder and confirm the details of the destination computer. Also refer to "Registering Folders", Connecting the Machine/ System Settings, and register the address of the destination computer to the address book.
Press the [Home] key on the top left of the control panel, and press the [Scanner] icon on the [Home] screen.
Make sure that no previous settings remain.
If a previous setting remains, press the [Reset] key.
Press the [Folder] tab.
Place originals.
If necessary, select [Send Settings] or [Original], and specify scan settings according to the original you want to scan.
Example: Scanning the document in color/duplex mode, and saving as a PDF file.
Press [Original], and then press [2 Sided].
Press [Send Settings]. Select [Type of Original], and then press [Full Colour].
Press [Send Settings]. Select [File Type], and then press [PDF].
For information about other settings, see Various Scan Settings.
Specify the destination.
You can specify multiple destinations.
For details, see Specifying Scan to Folder Destinations.
Press the [Start] key.
If you have selected more than one destination, you can press [] or [
] next to the destination field to scroll through the destinations.
To cancel a selected destination, press [] or [
] to display the destination in the destination field, and then press the [Stop] key. You can cancel a destination selected from the destination list by pressing the selected destination again.
To cancel scanning, press the [Stop] key. Check the information displayed in the dialog box, and then press any button.
You can also store a file and simultaneously send it by Scan to Folder. For details, see Simultaneous Storage and Sending by Scan to Folder.
After scan files are sent, the destination and file name fields will be automatically cleared. If you want to preserve the information in these fields, contact your local dealer.
You cannot switch the screen while e-mail or other destinations are being specified. To clear the specified destination, display the destination in the destination field of each screen, and then press the [Stop] key.