General Features

You can register text phrases you often use when specifying settings, such as ".com" and "Regards".

You can register up to 40 entries.

• Program / Change

  1. Press the [User Tools/Counter] key.

  2. Press [System Settings].

  3. Check that [General Features] is selected.

  4. Press [Program/Change/Delete User Text].

  5. Check that [Program/Change] is selected.

  6. Select the user text you want to change.

     To program a new user text, press [*Not Programmed].

  7. Enter the user text, and then press [OK].

     Enter the user text using up to 80 characters.

  8. Press [Exit].

  9. Press the [User Tools/Counter] key.

• Delete

  1. Press the [User Tools/Counter] key.

  2. Press [System Settings].

  3. Check that [General Features] is selected.

  4. Press [Program/Change/Delete User Text].

  5. Press [Delete].

  6. Select the user text you want to delete.

  7. Press [Yes].

  8. Press [Exit].

  9. Press the [User Tools/Counter] key.

The beeper (key tone) sounds when a key is pressed.

Default: [Medium]

You can have the beeper sound when the machine becomes ready to copy after leaving Energy Saver mode, or when the power is turned on.

Default: [On]

If the Panel Key Sound setting is [Off], the beeper does not sound, whatever the Warm-up Beeper setting is.

The copy counter can be set to show the number of copies made (count up) or the number of copies yet to be made (count down).

Default: [Up]

Specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on.

Default: [Home]

Allocate frequently used functions, programs, and Web pages to the function keys 1 through 5.

Default: [Do not Allocate]

Specify the function which you allocate to [Application], [Program], [Extended Feature] and [URL].

You can change the screen color.

Default: [Blue-grey]

Print Priority is given to the mode selected.

Default: [Display Mode]

You can set the length of time the machine waits before changing modes when using the multi-access function.

This is useful if you make many copies and have to change settings for each copy. If you set a longer reset period, you can prevent interruption from other functions.

Default: [Set Time], [3 second(s)]

When you select [Set Time], enter the time (3-30 seconds, in 1 second increments) using the number keys.

The Function Reset Timer setting is ignored if [Interleave] or [Job Order] is set for Print Priority.

You can enable or disable repetition of an operation if a key on the screen or control panel is pressed continuously.

Default: [Normal]

You can switch the measurement between [mm] and [inch] when you specify a custom size on the control panel.

(mainly Europe and Asia)

Default: [mm]

(mainly North America)

Default: [inch]

Specify how long to display the System Status and Job List display for.

Default: [On], [15 second(s)]

When the setting is [On], you can specify a display time between 10 and 999 seconds in 1 second increments using the number keys.

You can enable or disable the Compatible ID setting.

Default: [Active]