Skip header
 

Weekly Settings

1Press [Weekly Settings].

2Select the day of the week that you want to register.

3Press [Change] for the item you want to specify.

Operation panel screen illustration

4Press [Switch Time].

5Enter the switch time, and then press [Sharp].

Region A icon(mainly Europe and Asia)

Enter the switch time using the number keys.

Region B icon(mainly North America)

Enter the switch time using the number keys, and then select [AM] or [PM].

6Press [OK].

7Press [Output Mode].

8Select [Print], [Standby to Print], [ID Required Print], [Forwarding], or [Store].

9If you select [Forwarding], configure the settings in "Forwarding Destination".

Press [Forwarding Destination].

  • Specify Destination

    Press [Specify Destination]. Select a transmission type and specify an end receiver using the destination list, and then press [OK] twice.

  • Security

    Press [Security].

    To encrypt e-mails, press [Encryption].

    To attach a signature to an e-mail, press [Signature].

    After configuring the settings, press [OK].

  • Print Forwarding Mark

    To print a Forwarding Mark on the forwarded document, make sure that [Print Forwarding Mark] is selected.

Press [OK].

10If you select [Store], specify the destination for the Reception Report e-mail in "Store: Notify Destination".

Press [Store: Notify Destination], and then press [Notify].

  • Notify Destination

    Press [Notify Destination], select an e-mail address from the destinations registered in the Address Book, and then press [OK].

  • Security

    Press [Security].

    To encrypt e-mails, press [Encryption].

    To attach a signature to an e-mail, press [Signature].

    After configuring the settings, press [OK].

Press [OK].

11Press [OK] twice.

12Press [Exit] twice.