Skip header
 

Original Orientation

When using the exposure glass, place the original face down. When using the ADF, place it face up.

If the original cannot be placed in a readable direction (e.g. A4Portrait or 81/2 × 11Portrait), rotate it 90 degrees and place it in an unreadable direction.

Placing the original on the exposure glass

Illustration of original orientation

Placing the original in the ADF

Illustration of original orientation

Specify a readable or unreadable direction according to the orientation of the original. If you do not specify the orientation correctly, applying some functions may result in outputs that may differ what you want.

The default setting is unreadable direction.

When using functions such as Duplex and Combine, take care to specify the orientation of the original correctly.

For example, the following diagram shows how to copy A4Portrait or 81/2 × 11Portrait originals when the Combine function is selected:

Illustration of original orientation

1Press [Orig.].

Operation panel screen illustration

2Press [Original's Orientation].

3Select the original orientation, and then press [OK] twice.

Operation panel screen illustration

Note

  • It is recommended that you use this function together with the Auto Reduce/Enlarge function.