Skip header
 

Canceling a Transmission While the Original Is Being Scanned

Use this procedure to cancel scanning or transmitting of the original while it is being scanned.

If you cancel a transmission using the standard memory transmission function, you need to follow a different procedure to cancel the transmission. See Canceling a Transmission After the Original Is Scanned.

1Press the [Stop] key.

Stop key illustration

2Press [Cancel Scanning] or [Cancel TX].

Depending on the transmission mode and function you use, either [Cancel Scanning] or [Cancel TX] is displayed.

Note

  • Scanning may be completed while you are performing the cancel operation.