Skip header
 

Specify the path by browsing to the destination on the Netware server

Specify the path by browsing to the destination folder in an NDS tree or on a NetWare Bindery server.

1Press [Manual Entry].

Operation panel screen illustration

2Press [NCP].

3Select the connection type.

Press [NDS] to specify a folder in the NDS tree.

Press [Bindery] to specify a folder on the NetWare Bindery server.

4Press [Browse Network] under the path name field.

If you selected [NDS] under [Connection Type], the NDS tree list appears.

If you selected [Bindery] under [Connection Type], the NetWare Bindery server list appears.

5Search for the destination folder in the NDS tree or NetWare Bindery server.

If you cannot find the destination folder, press [Up One Level], and then search for the folder at that level.

6Select the destination folder.

7Press [OK] twice.

Note

  • If you change the protocol after entering the path name, user name, or password, a confirmation message appears.

  • Only folders that you have the read privileges for are displayed.

  • If the language used for the NDS tree or by the NetWare Bindery server differs from that used by the machine, file names in the NDS tree or on the NetWare Bindery server might appear garbled.

  • Up to 100 items can be displayed.

  • If the selected NDS tree or NetWare Bindery server requires authentication, a login screen appears. Enter a user name and password for logging in to the NDS tree or NetWare Bindery server. If you log in to the NDS tree, enter a user name, and then enter the name of the context containing the user object. If the user name is "user" and the name of the Context is "context", the user name will be "user.context".

  • The machine may fail to transfer the file if you do not have write privileges for the folder or there is not enough free hard disk space.

PreviousNext