Previous
Using Batch mode, you can copy an original that is too large to place in the ADF by placing it in the ADF in sections (batches). The original will be scanned and stored as a single document.
Depending on your model and which options are installed on it, this function might not be available. For details, see "Functions Requiring Optional Configurations", Getting Started.
Place special originals, such as translucent paper, one by one.
The maximum number of sheets you can load in the ADF is 100.
Press [Special Original].
Press [Batch], and then press [OK].
Place the first part of the original, and then press the [Start] key.
After the first part of the original has been fed, place the next part, then press the [Start] key.
To copy subsequent originals in this mode, repeat step 4.
When the Sort, Combine or 1 Sided
2 Sided function has been selected, press the [
] key after all originals have been scanned.You cannot switch between one-sided and two-sided originals during copying.
When [SADF] is displayed instead of [Batch], specify the Batch mode under [Switch to Batch] in User Tools. For details, see Input / Output
.
