Letterhead

Paper type setting using the control panel

The [Menu] key > [Paper Input] > [Paper Type: (tray name)] > [Letterhead] > the [OK] key

Paper type setting using the printer driver

[Letterhead]

Supported input tray

Any input tray can be used.

Maintenance

Default: [Letterhead 1]

• [Letterhead 1]

• [Letterhead 2]

• [Letterhead 3]

If prints made using the paper tray show heavy smudging, use the following procedure to change the paper type setting from the control panel:

• Press the [Menu] key, select [Maintenance], [General Settings], and then select [Letterhead Setting]. Select the paper tray, and then select [Letterhead 1], [Letterhead 2], or [Letterhead 3].

When specifying paper thickness, remember that a higher number indicates greater thickness. Also, because the paper thickness will normally be detected automatically, change this setting only if a print problem occurs.

Duplex printing

Supported