Skip header
ContentsPreviousNextHelp

Top Page > Appendix > Transmission Using IPsec > Enabling and Disabling IPsec Using the Control Panel

Enabling and Disabling IPsec Using the Control Panel

  1. Press the [User Tools] key.

  2. Press the [Up arrow key][Down arrow key] key to select [Admin. Tools], and then press the [OK] key.

  3. If you are requested to enter a password, enter the password using the number keys, and then press the [OK] key.

  4. Press the [Up arrow key][Down arrow key] keys to select [IPsec], and then press the [OK] key.

  5. Press the [Up arrow key][Down arrow key] keys to select [Active] or [Inactive], and then press the [OK] key.

  6. Press the [Clear/Stop] key to return to the initial screen.

Note

Reference

TopPreviousNext
Copyright (C) 2011