



	Contents Previous Next

Top Page > Maintenance > If the Machine is Not Going to Be Used for a Long Time > Preparing the Machine for a Long Period of Inactivity

Preparing the Machine for a Long Period of Inactivity

Use this procedure to prepare the machine for a long period of inactivity with its power switch turned off.

Note that not using the following procedure could result in unusual noises when use of this machine is resumed.

Do not switch off the machine during printing.

Turn off the power switch.
Pull out the plug from the socket.
Pull the opening lever on the front cover, and then carefully lower the front cover.
Lower the fusing unit lever.
Close the front cover with both hands carefully.

This step is not necessary if the machine's power switch is on but the machine has been inactive for a long time.