Network Setting Parameters

MAC Address

Displays the machine's MAC address.

Ethernet Speed

Displays the current Ethernet speed setting.

• 100Mbps Full Duplex

• 100Mbps Half Duplex

• 10Mbps Full Duplex

• 10Mbps Half Duplex

• Ethernet Unavailable

  Appears when a network cable is not connected.

Set Ethernet Speed

Specifies the speed for Ethernet communication. Select a speed that matches your network environment.

For most networks, the default setting is the optimum setting.

Default: [Auto Select]

• Auto Select

• 100Mbps Full Duplex

• 100Mbps Half Duplex

• 10Mbps Full Duplex

• 10Mbps Half Duplex

DHCP

Sets the machine to receive its IPv4 address, subnet mask, and default gateway address automatically from a DHCP server.

When DHCP is used, you cannot specify the IPv4 address, subnet mask, or default gateway address manually.

Default: [Active]

• Active

• Inactive

IP Address

Specifies the machine's IPv4 address when DHCP is not used.

Use this menu to check the current IP address when DHCP is used.

Default: XXX.XXX.XXX.XXX

The numbers represented by "X" vary according to your network environment.

Subnet Mask

Specifies the machine's subnet mask when DHCP is not used.

Use this menu to check the current subnet mask when DHCP is used.

Default: XXX.XXX.XXX.XXX

The numbers represented by "X" vary according to your network environment.

Gateway Address

Specifies the machine's default gateway address when DHCP is not used.

Use this menu to check the current default gateway address when DHCP is used.

Default: XXX.XXX.XXX.XXX

The numbers represented by "X" vary according to your network environment.

IP Address Method

Displays the IP address acquisition method.

• DHCP

• Auto IP

• Manual Config.

• Default IP

IPv6

Select whether to enable or disable IPv6.

Default: [Active]

• Active

• Inactive

DHCP

Sets the machine to receive its IPv6 address from a DHCP server.

When DHCP is used, you cannot specify the IPv6 address manually.

Default: [Inactive]

• Active

• Inactive

IP Address (DHCP)

Displays the IPv6 address obtained from a DHCP server.

Manual Config. Address

• Manual Config. Address

  Specifies the machine's IPv6 address when DHCP is not used. Can contain up to 39 characters.

• Prefix Length

  Specifies the prefix length, using a value between 0 and 128.

• Gateway Address

  Specifies the IPv6 address of the default gateway. Can contain up to 39 characters.

Stateless Address

Displays the IPv6 stateless addresses obtained from a Router Advertisement.

• Stateless Address 1

• Stateless Address 2

• Stateless Address 3

• Stateless Address 4

Link-local Address

Displays the IPv6 link local address.