Fax Transmission Setting Parameters

Sets the machine to send a fax immediately when the original is scanned.

Default: [Off]

• Off

  Select this when using Memory Transmission.

• On

  Select this when using Immediate Transmission.

• Next Fax Only

  Select this when using Immediate Transmission for the next transmission only.

Specifies the resolution to use for scanning originals.

The "Photo" resolution is not available for Internet Faxes. Faxes will be sent using "Detail" resolution if "Photo" resolution has been specified.

Default: [Standard]

• Standard

  Select this when the original is a printed or typewritten document with normal-sized characters.

• Detail

  Select this when the original is a document with small print.

• Photo

  Select this when the original contains images such as photographs or shaded drawings.

Specifies the image density to use for scanning originals.

Default: [Normal]

• Light

• Normal

• Dark

Specifies the length of pause time when a pause is inserted between the digits of a fax number.

Default: 3 seconds

• 1 to 15 seconds, in 1 second increments

Sets the machine to redial the fax destination automatically when the line is busy or a transmission error occurs, if the machine is in Memory Transmission mode. The number of redial attempts is preset to two or three times, depending on the [Country] setting under [Admin. Tools], in five-minute intervals.

Default: [On]

• Off

• On

Sets the machine to add a header to every fax you send. The header includes the current date and time, user fax name and number, job ID, and page information.

Default: [On]

• Off

• On