Skip header
ContentsPreviousNextHelp

Top Page > Using the Fax Function > Sending a Fax > Selecting Transmission Mode

Selecting Transmission Mode

This section describes how to select the transmission mode.

There are two transmission modes: Memory Transmission and Immediate Transmission.

Memory Transmission

In this mode, the machine scans several originals into memory and sends them all at once. This is convenient when you are in a hurry and want to take the document away from the machine. In this mode, you can send a fax to multiple destinations.

Immediate Transmission

In this mode, the machine scans the original and faxes it simultaneously, without storing it in memory. This is convenient when you want to send an original quickly. In this mode, you can only specify one destination.

  1. Press the [Facsimile] key.

    Facsimile key illustration

  2. Press the [Left arrow key][Right arrow key] keys.

    Left and right arrow keys illustration

  3. Press the [Up arrow key][Down arrow key] keys to select [Immediate TX], and then press the [OK] key.

  4. Press the [Up arrow key][Down arrow key] keys to select [Off], [On], or [Next Fax Only], and then press the [OK] key.

    For Memory Transmission, select [Off].

    For Immediate Transmission, select [On] or [Next Fax Only].

  5. Press the [User Tools] key to return to the initial screen.

Note

TopPreviousNext
Copyright (C) 2011