



	Contents Previous Next

Top Page > Using the Fax Function > The Screen in Fax Mode

The Screen in Fax Mode

This section provides information about the screen in fax mode.

By default, the display shows the copier screen when the machine is turned on.

If the copy or scanner screen is shown on the display, press the [Facsimile] key on the control panel to switch to the fax screen.

Facsimile key illustration

Screen in standby mode

Operation panel screen illustration numbered callout illustration

Current status or messages
Displays the current status or messages.
Current settings
Displays the current density and resolution settings.
Selection key items
Displays the functions you can use by pressing the corresponding selection keys.
Current date and time
Shows the current date and time.

The machine's default mode at power on can be specified in the [Function Priority] setting under [Admin. Tools].
The display format for time and date can be specified in [Set Date/Time] under [Admin. Tools].

For details about [Function Priority], see Administrator Settings.
For details about setting the date and time, see Setting the Date and Time.