Skip header
ContentsPreviousNextHelp

Connecting to a Telephone Line

You can connect the machine to the public switched telephone network (PSTN) directly or through a private branch exchange (PBX).

Also, you can connect an external telephone to use the same telephone line for voice calls.

region-b

CAUTION


  • To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

region-b

ATTENTION


  • Pour réduire le risque d'incendie, utiliser uniquement des conducteurs de télécommunications 26 AWG ou de section supérieure.

Important

  1. Remove the cable cover.

    Machine illustration

  2. Connect a telephone line cord to LINE.

    Machine illustration

  3. If using an external telephone, connect the telephone to TEL.

    Machine illustration

  4. Pass the telephone line cord through the opening in the cable cover.

    Machine illustration

  5. Hook the tabs of the cable cover into the openings of the machine.

    Machine illustration

  6. Attach the cable cover in place.

    Machine illustration

    Note

    • After connecting the machine to the telephone line, configure the telephone network settings and fax reception mode.

    • If your telephone has functions that are not compatible with this machine, those functions will not be usable.

    • Confirm that you have registered user fax number and user name during Initial Setup. You can check the registered information in [Program Fax Information] under [Admin. Tools].

    Reference