



	Contents Previous Next

Top Page > Getting Started > Connecting the Machine > Connecting with a Network Cable

Connecting with a Network Cable

Follow the procedure below to connect the machine to a computer through a network.

Prepare the hub and other network devices before connecting the 10BASE-T or 100BASE-TX cable to the machine's Ethernet port.

Do not connect the Ethernet port of the machine to a network that may supply excess voltage, such as a telephone line. Doing so may result in fire or electric shock

Use shielded Ethernet cable. Unshielded cables create electromagnetic interference that could cause malfunctions.
The Ethernet cable is not supplied with this machine. Select your cable according to the network environment.

Remove the cable cover.
Connect the Ethernet cable to the Ethernet port.
Connect the other end of the cable to the network (e.g., a network hub).
Attach the cable cover.

For details about network environment settings, see Configuring the Machine.
For details about installing printer drivers for network connection, see the instructions provided on the driver CD-ROM.

Related topics

Reading the LED lamps