Control Panel

Fax Received indicator

Lights up when received faxes that have not been printed out exist in the machine's memory. Flashes when the machine is unable to print out the faxes due to machine errors such as an empty paper tray or a paper jam.

[Pause/Redial] key

• Pause

  Press to insert a pause in a fax number. The pause is indicated by “P”.

• Redial

  Press to display the last used scan or fax destination.

[On Hook Dial] key

Press to use on-hook dialing to check the destination's status when sending a fax.

[Address Book] key

Press to select a scan or fax destination from the Address Book.

[Image Quality] key

Press to select scan quality for the current job.

• Copier mode: select Text, Photo, or Mixed.

• Scanner mode: select the resolution.

• Fax mode: select Standard, Detail, or Photo.

[User Tools] key

Press to display the menu for configuring the machine's system settings.

[Copy] key

Press to switch to copier mode. The key stays lit while the machine is in copier mode.

[ID Card Copy] key

Press to enter ID card copy mode for the current job.

Screen

Displays current status and messages.

Scroll keys

Press to move the cursor in the directions indicated by each scroll key.

Pressing the [][] keys while the machine is in standby mode will display the menu for configuring the settings of the machine's current operation mode (copier, scanner, or fax).

Number keys

Use to enter numerical values when specifying settings such as fax numbers and copy quantities, or enter letters when specifying names.

[Clear/Stop] key

• While the machine is processing a job: press to cancel the current job.

• While configuring the machine: press to cancel the current setting and return to standby mode.

• While in standby mode: press to cancel temporary settings such as image density or resolution.

[B&W Start] key

Press to scan or copy in black and white, or start sending a fax.

[Color Start] key

Press to scan or copy in color.

[OK] key

Press to confirm settings or enter the next level of the menu tree.

[Escape] key

Press to cancel the last operation or exit to the previous level of the menu tree.

Selection keys

Press the key that corresponds to an item shown on the bottom line of the screen to select it.

[Facsimile] key

Press to switch to fax mode. The key stays lit while the machine is in fax mode.

[Scanner] key

Press to switch to scanner mode. The key stays lit while the machine is in scanner mode.

[Density] key

Press to adjust image density for the current job.

• Copier mode: select from 5 levels of density.

• Scanner mode: select from 5 levels of density.

• Fax mode: select from 3 levels of density.

[Reduce/Enlarge] key

• Copier mode: press to specify the reduction or enlargement ratio for the current job.

• Scanner mode: press to specify the scanning size according to the current original.

[Shift] key

Press to switch between Quick Dial numbers 1 to 10 and 11 to 20 when specifying a scan or fax destination using the One Touch buttons.

Alert indicator

Flashes yellow when the machine will require maintenance soon (such as replacing consumables), or lights up red when a machine error occurs.

When an alert is issued, check the messages on the screen and follow the instructions as provided in "Error and Status Messages on the Screen".

Power indicator

Remains lit while the power is on. It is unlit when the power is off.

One Touch buttons

Press to select a scan or fax Quick Dial destination.