Skip header
ContentsPreviousNextHelp

Top Page > Guide to the Machine > Guide to Components > Exterior: Rear View

Exterior: Rear View

Rear view numbered callout illustration

  1. Button for Sliding the ADF

    Press to slide the ADF towards the rear of the machine and hold it in that position, if paper output to the output tray is difficult to retrieve.

  2. Power Switch

    Use this switch to turn the power on or off.

  3. Power Socket

    For connecting the power cord to the machine.

  4. Rear Cover

    Remove this cover when loading paper longer than A4 in tray 1.

  5. Cable Cover

    Remove this cover when connecting cables to the machine.

  6. External Telephone Connector

    For connecting an external telephone.

  7. USB Port

    For connecting the machine to a computer using a USB cable.

  8. Ethernet Port

    For connecting the machine to the network using a network interface cable.

  9. G3 (analog) Line Interface Connector

    For connecting a telephone line.

  10. Stop Fences

    Pull up this fence to prevent paper falling off when printing a large amount of paper at a time. The fence can be adjusted at the A4/Letter or Legal size position

Note

TopPreviousNext
Copyright (C) 2011