Every time an original page changes, a slip sheet is inserted. You can also print on the inserted slip sheet.
Since a slip sheet is inserted for every page, you can protect printed surfaces. This function is useful in copying onto OHP transparencies.
If [1 Sided 2 Sided] is set, cancel the setting.
Before using this function, select the tray for slip sheets under Slip Sheet Tray in Tray Paper Settings. For details, see “System Settings”, Network and System Settings Reference.
When copying onto OHP transparencies
Copy
Blank
Press [Cover/Slip Sheet].
Select [Copy] or [Blank] for the slip sheets, and then press [OK].
Select the main sheet tray that contains the paper to copy the originals.
When copying onto OHP transparencies, use tray 1 or the bypass tray.
When loading OHP transparencies on tray 1 or the bypass tray, press the [] key and select [OHP (Transparency)] in Paper Type. For details, see “Copying onto Special Paper from Tray 1” or “Copying onto Special Paper from the Bypass Tray”.
The slip sheets should be the same size and orientation as the copy paper or the OHP transparency.
If you do not copy onto slip sheets, they are excluded from the number of copies counted.