Configuring the Energy Saver Mode Settings
Click the [Energy Saver Mode] tab on the administrator settings page to set the printer to enter Energy Saver mode, Energy Saver mode 1 or Energy Saver mode 2, to reduce power consumption.
Item |
Description |
|---|---|
Energy Saver Mode 1 |
Select [Active] to set the printer to enter Energy Saver mode 1 if the printer has been idle for about 30 seconds. It takes less time to recover from Energy Saver mode 1 than from power-off state or Energy Saver mode 2, but power consumption is higher in Energy Saver mode 1 than in Energy Saver mode 2. |
Energy Saver Mode 2 |
Select [Active] to set the printer to enter Energy Saver mode 2 after the period of time specified for [Waiting Time (1-240)] is passed (1 to 240 minutes). The printer consumes less power in Energy Saver mode 2 than in Energy Saver mode 1, but it takes longer to recover from Energy Saver mode 2 than from Energy Saver mode 1. |
The printer recovers from Energy Saver mode when it receives a print job or when any key on the printer is pressed.
