Skip header
 

Setting a paper size using the control panel

To load paper whose size cannot be selected automatically, set the paper size on the control panel. Follow the procedure described below to set the paper size.

1Press the [Menu] key.

Menu key illustration

2Press the [Up arrow key] or [Down arrow key] key to display [Paper Input], and then press the [OK] key.

Menu:               
Paper Input         

3Press the [Up arrow key] or [Down arrow key] key to display [Paper Size], and then press the [OK] key.

Paper Input:        
Paper Size          

4Press the [Up arrow key] or [Down arrow key] key to display the target paper tray, and then press the [OK] key.

In this example, [Tray 1] is selected.

Paper Size:         
Tray 1              

5Press the [Up arrow key] or [Down arrow key] key to display the loaded paper size, and then press the [OK] key.

region-a

Tray 1 Ppr Size:    
A4                  

region-b

Tray 1 Ppr Size:    
8 1/2 x 11          

6Press the [Menu] key.

Note

  • If the [Auto Continue] setting under [System] is enabled, the printer ignores the paper type and size settings and prints on whatever paper is loaded. Printing stops temporarily when the error is detected, and restarts automatically after about ten seconds using the settings made on the control panel.