Saving Energy
This section explains the machine's energy saving functions.
This machine has the following energy saving functions.
Energy Saver
If you do not use the machine for a certain period after an operation, or when you press the [Energy Saver] key, the display disappears and the machine goes into Energy Saver mode. When you press the [Energy Saver] key again, the machine returns to the ready condition. The machine uses less electricity in Energy Saver mode.
You can change the amount of time the machine waits before switching to Energy Saver mode after copying has finished or the last operation is performed under Panel Off Timer.
Auto Off
If the machine remains inactive for a specified period, it automatically enters the same low power state that it enters when the operation switch is pressed (indicator unlit). This function is called “Auto Off”.
You can change the Auto Off time under Auto Off Timer.
See “System Settings”, Network and System Settings Reference.
The Energy Saver and Auto Off functions will not operate in the following cases:
When a warning message appears
When the service call message appears
When paper is jammed
When the cover is open
When the “Replace Print Cartridge.” message appears
When the print cartridge is being replaced
When the User Tools screen is displayed
When fixed warm-up is in progress
When data is being processed
When operations are suspended during printing
When the On-hook dialing function is in use
When a recipient is being registered in the address list or group dial list
When the Data In indicator is on or blinking
When the screen of a document that was stored under the printer function appears. (The machine enters Energy Saver mode if this happens.)
When the sample print, locked print, hold print, or stored print screen is displayed
When the internal cooling fan is active
