Skip header
Help
 

Registering Frequently Used Functions

You can store frequently used copy job settings in the machine memory and recall them for future use.

You can store up to 10 programs.

The settings you can register are Paper Tray, Original Type, Density, Original Settng, Finishing, Cover/Slip Sheet, Edit / Stamp, Dup./Combine/Series, Reduce / Enlarge, Store File, the bypass tray's paper size and type, and number of copies.

Note

  • When a specified program is registered as the default, its values become the default settings, which are displayed without pressing the [Program] key, when modes are cleared or reset, and after the operation switch is turned on. See “Changing the Default Functions of the Copy's Initial Display”.

  • Paper settings are stored based on paper size. So if you place more than one paper tray of the same size, the paper tray prioritized under System Settings in User Tools will be selected first. For details, see “System Settings”, Network and System Settings Reference.

  • Programs are not deleted by turning the power off or by pressing the [Clear Modes] key.