ManualsContentsPreviousNext |
Replacement Alert
Use this function to specify the timing of when the Alert Indicator will light up to prompt the user to replace supplies.
Fusing Unit
Default: [Normal]
Notify Sooner
Normal
Notify Later
Supply End Option
You can specify whether or not to continue printing after the following components have exceeded their recommended service life.
Default: [Continue Printing]
Continue Printing
Stop Printing
Display Supply Info
You can select whether or not the amount of toner is displayed on the initial screen.
Default: [On]
On
Off
Menu Protect
You can select whether or not to protect the menu settings. If you enable this setting, you must specify a protection level.
If you would like to lower the protection level, disable this setting or select [Level 1].
You may not be able to change this setting depending on the setting of the printer.
Default: [Level 2]
Level 1
Level 2
Off
List/Test Print Lock
You can select whether or not to prohibit List/Test printing.
You may not be able to change this setting depending on the setting of the printer.
Default: [Off]
On
Off
Unit of measure
You can specify the unit for measurement.
Default:
(mainly Europe and Asia)
[mm]
(mainly North America)
[inch]
mm
inch
Panel Key Sound
You can select whether or not to enable the panel key sound.
Default: [On]
On
Off
Warm-up Beeper
You can select whether or not to sound the beeper when the printer has completed a warm-up process.
Default: [Off]
On
Off
Display Contrast
You can specify the density of the display by selecting one of seven levels.
Key Repeat
You can specify whether or not to scroll the display panel when the [ ] or [ ] key is held down. When you enable this setting, specify the scroll speed. (If repeat time is set to "Long", scroll speed becomes slow.)
Default: [Normal]
Do not Repeat
Normal
Repeat Time: Medium
Repeat Time: Long
Function Priority
Specify the function that is selected by default whenever the printer is turned on or leaves Energy Saver mode.
The order of the items on this menu reflects the order of the functions that appear when [Switch Functions] is pressed.
Default: [Printer]
Printer
Extended Features 1
Extended Features 2
Extended Features 3