Skip header
 

Top Page > Hardware Guide > Loading Paper > Loading Envelopes > Loading Envelopes into the Bypass Tray > Specifying envelope size for the bypass tray

Specifying envelope size for the bypass tray

Important

  • The envelope size selected using the printer driver overrides that selected using the control panel, so do not make settings using the control panel if you have already made settings using the printer driver.

  • When [Machine Setting(s)] is selected for [Tray Setting Priority] under [Machine Modes] in [Print Settings], any settings made using the printer's control panel have priority over any settings made using the printer driver.

  • For details about the printer driver, see the printer driver Help.

1Press the [Menu] key.

Menu key illustration

2Press the [Down arrow key ] or [Up arrow key ] key to select [Paper Input], and then press the [OK] key.

Operation panel screen illustration

3Press the [Down arrow key ] or [Up arrow key ] key to select [Paper Size:Bypass Tray], and then press the [OK] key.

Operation panel screen illustration

4Select the envelope type using the scroll keys, and then press the [OK] key.

Operation panel screen illustration

5Press the [Menu] key.

Note

  • After specifying the paper size, specify a paper type such as [Envelope] using the control panel or printer driver. For details on specifying a paper type using the control panel, see Specifying a paper type for the bypass tray.

  • For details about the printer driver, see the printer driver Help.