Ethernet Configuration
Configure the printer for the network using the control panel.
The following table shows the control panel settings and their default values. These items appear in the [Network] under [Host Interface] menu.
Setting Name |
Default |
|---|---|
Machine IPv4 Address |
|
IPv6 Stateless Setting |
Active |
IPsec |
Inactive |
NW Frame Type |
Auto Select |
Effective Protocol |
|
Ethernet Speed |
Auto Select |
IEEE802.1X Auth.(Ethernet) |
Inactive |
Restr.IEEE802.1X Auth.Def. |
- |
LAN Type |
Ethernet |
Permit SSL/TLS Comm. |
Ciphertext Priority |
If DHCP is in use on your network, the IP address, subnet mask, and gateway address are all set automatically.
If the printer is already placed on a TCP/IP-capable environment, you can also use a Web browser to configure the IP address-related settings.
Configure these setting as necessary. See Software Guide for details.
