Skip headerPro C651EX/C751EX
ManualsContentsPreviousNextHelp

Top Page > Network and System Settings Reference > Appendix > Configuring the WINS Server > Using Web Image Monitor

Using Web Image Monitor

  1. Log in to Web Image Monitor in the administrator mode.

  2. In the menu area, click [Configuration].

  3. Under "Network", click [IPv4].

  4. Check that [Active] is selected for [WINS] in the [Ethernet] column, and then enter the WINS server IPv4 address in [Primary WINS Server] and [Secondary WINS Server].

  5. Click [OK].

  6. "Updating..." appears. Wait for about one or two minutes, and then click [OK].

  7. Quit Web Image Monitor.

Note

TopPreviousNext
Copyright (C) 2010