Copying onto Custom Size Paper
Use the following procedure to copy onto custom size paper fed in from the multi bypass tray (tray 6).
Place paper print side up on the multi bypass tray (tray 6).
While pinching the release lever, adjust the side fences to the size of the paper.
Set the end fence, and then press the elevator switch on the multi bypass tray (tray 6).
Select the multi bypass tray (tray 6) on the control panel.
Press the [
] key.
Press [Program Custom Size].
Enter the horizontal size with the number keys, and then press [].
Enter the vertical size with the number keys, and then press [].
Press [OK] twice.
Place the originals, and then press the [Start] key.
To change the value you entered, press the item you want to change, and then enter a new value.
