Skip header
 

Top Page > Copy and Document Server Reference > Basic Copying > Basic Procedure >  Reverse Ejection

Reverse Ejection

Copies are delivered in opposite order to the default order setting.

1 Sided originals

Illustration of Reverse Ejection

2 Sided originals

Illustration of Reverse Ejection

  1. Face down (same order as original)

  2. Face up (reverse order of original)

1Press [Output/ Customize Function/ Finisher].

Operation panel screen illustration

2Press [Output/ Cstmz.].

3Press [Rvrse Ejct: FaceUp/Dn].

Operation panel screen illustration

4Press [OK].

5Place the originals, and then press the [Start] key.

Note

  • The paper weight that can be used with this function is 52.3 hyphen 300.0 g/m2 (14.0 lb. Bond hyphen 165.0 lb. Index). However, the paper weight is 80.1 hyphen 300.0 g/m2 (21.1 lb. Bond hyphen 165.0 lb. Index) when using coated paper.

  • You cannot use the following copy paper with this function:

    • OHP transparencies

    • Translucent paper

    • Label Paper (adhesive labels)

    • Envelope

  • Tab stocks are always delivered face down.