Skip header
 

Printing from a Selected Tray

If the printer does not have a tray for the selected paper size or paper type, or if the selected paper loaded in the printer has run out, a caution message appears. If this message appears, do the following procedure.

1When the caution message appears, press [FormFeed].

Operation panel screen illustration

A confirmation message appears.

2Press the [OK] key.

Operation panel screen illustration

3Select the tray for form feed using the [Up arrow key] or [Down arrow key] key from those that appear on the display panel, and then press the [OK] key.

Operation panel screen illustration

Note

  • If a tray with a smaller paper size is selected, the print job may be cut short, or other problems may occur.