Skip header
 

Confirming Transmission Results by E-mail

After communicating in the LAN-Fax mode, this function transmits the communication results with the computer by e-mail.

Important

  • To confirm transmission results by e-mail, the Hard Disk Drive Option and printer/scanner functions must be installed.

When you have done [Send] or [Send & Print] using the LAN-Fax, and when the communication was successful, it transmits e-mail of the transmission result.

Result notification e-mail is sent when printing is complete, or if an error occurs during communication between this machine and a computer.

1Click the [E-mail Settings] tab.

2Select the [Notify] check box under [E-mail TX results].

3Enter the destination.

When entering the e-mail address directly, click the [Specify destinations] radio button, and then enter the e-mail address in the [Specify destinations] field.

When entering the machine's programmed address, click the [Device Address] radio button, and then enter the registration number of the destination list in the [Device Address] box.

The [Device Address] box is unavailable when [Specify destinations] is selected, and you cannot enter anything in the text box.

4Click [Send] or [Send & Print].

Note

  • You can confirm transmission results using the E-mail TX Result function and the Communication Result Report. You can set whether to use both of these together in User Parameter (switch 10, bit 6) in the Fax Features menu. See “Parameter Settings”.

  • If there be any insufficient configurations in the e-mail menu on this machine, or if “Auto Specify Sender Name” is set to “Off”, the LAN-Fax result notification e-mail is not transmitted, and the LAN-Fax Result Report is printed. See “Connecting the Machine”, Network and System Settings Guide for the e-mail settings, and see “LAN-Fax Result Report” for the LAN-Fax Result Report.