Skip header
 

Checking Transmission Using LAN-Fax Driver

From “SmartDeviceMonitor for Admin”, “SmartDeviceMonitor for Client”, or Web Image Monitor, you can check information about files sent using LAN-Fax Driver.

For the maximum number of transmission results you can check, see “Maximum Values”.

Also, you can save the contents of the Journal in a personal computer as a CSV file using [Load Fax Journal] in “SmartDeviceMonitor for Admin”.

Note

  • When data is transmitted from the LAN-Fax Driver via the “SmartDeviceMonitor for Client” port, the “Data-transmission complete.” message appears on the computer's display, so you can easily ascertain the communication progress. However, if the volume of communication data from the LAN-Fax to this machine increases, the message may appear during the operation, due to the differences in memory capacity between this machine and “SmartDeviceMonitor for Client”. For more accurate fax transmission results, use “E-mail TX results”.

  • The job history may differ from the machine's transmission results. In that case, refer to the machine's transmission results.

  • See the relevant Help for details.