Reproduction Ratio

You can register up to three frequently used Reduce/Enlarge ratios other than the fixed Reduce/Enlarge ratio and have them shown on the initial display.

You can also change registered Reduce/Enlarge ratios.

When you select [User Reduce/Enlarge Ratio], the ratio can be set from 25 to 400%, using the number keys.

Default for “F1”: [73%]

Default for “F2”: [155%]

Default for “F3”: [93%]

You can specify the enlargement and reduction ratios that appear if [Reduce / Enlarge] is pressed on the copier screen.

• 25%

• 11 × 17 5¹/₂ × 8¹/₂ (50%)

• 11 × 17 8¹/₂ × 11 (65%)

• 11 × 15 8¹/₂ × 11 (73%)

• 8¹/₂ × 14 8¹/₂ × 11 (78%)

• 8¹/₂ × 13 8¹/₂ × 11 (85%)

• 93%

• 8¹/₂ × 14 11 × 17 (121%)

• 8¹/₂ × 11 11 × 17 (129%)

• 5¹/₂ × 8¹/₂ 8¹/₂ × 14 (155%)

• 5¹/₂ × 8¹/₂ 11 × 17 (200%)

• 400%

• User Reduce/Enlarge Ratio (25 400%)

You can set the ratio with priority when [Reduce / Enlarge] is pressed.

Default: [65%]

You can set a Reduce/Enlarge ratio when registering Create Margin in a shortcut key.

Enter a ratio using number keys (in the range of 90 to 99%).

Default: [93%]