Skip header
 

Specifying the ratio with [Minus] and [Plus]

Specify a ratio using [Minus] and [Plus].

1Press [Reduce / Enlarge].

Operation panel screen illustration

2Select a preset ratio which is close to the desired ratio.

3Adjust the ratio with [Minus] and [Plus].

Operation panel screen illustration

Press [Minus] or [Plus] changes the ratio in increments of 1%. Pressing and holding down [Minus] or [Plus] changes it in increments of 10%.

4Press [OK].

5Place the originals, and then press the [Start] key.

Note

  • To change the value you specified, readjust it with [Minus] and [Plus].