General Settings

Use this function to specify the timing of notifications prompting the user to replace supplies. You can specify this setting for notifications of print cartridge replacement.

• Print Cartridge

  Default: [Normal]

  • Notify Sooner

  • Normal

  • Notify Later

You can specify whether or not to continue printing after the following components have exceeded their recommended service life.

Default: [Continue Printing]

• Continue Printing

• Stop Printing

You can select whether or not the amount of toner is displayed on the initial screen.

Default: [On]

• On

• Off

You can select whether or not to protect the menu settings. If you enable this setting, you must specify a protection level.

If you would like to lower the protection level, disable this setting or select [Level 1].

You may not be able to change this setting depending on the setting of the printer.

Default: [Level 2]

• Level 1

• Level 2

• Off

You can select whether or not to prohibit List/Test printing.

You may not be able to change this setting depending on the setting of the printer.

Default: [Off]

• On

• Off

You can specify the unit for measurement.

Default:

(mainly Europe and Asia)
[mm]

(mainly North America)
[inch]

• mm

• inch

You can select whether or not to enable the panel key sound.

Default: [On]

• On

• Off

You can select whether or not to sound the beeper when the printer has completed a warm-up process.

Default: [Off]

• On

• Off

You can specify the density of the display by selecting one of seven levels.

You can specify whether or not to scroll the display panel when the [ ] or [ ] key is held down. When you enable this setting, specify the scroll speed. (If repeat time is set to "Long", scroll speed becomes slow.)

Default: [Normal]

• Do not Repeat

• Normal

• Repeat Time: Medium

• Repeat Time: Long

Specify the function that is selected by default whenever the printer is turned on or leaves Energy Saver mode.

The order of the items on this menu reflects the order of the functions that appear when [Switch Functions] is pressed.

Default: [Printer]

• Printer

• Extended Features 1

• Extended Features 2

• Extended Features 3