Quality Maintenance

You can perform automatic adjustment of color registration.

You can adjust the gradation of bright (highlighted parts) and medium areas (middle parts) for printing. For details, see Hardware Guide.

• Adjust Auto Density

  You can have color density adjustment performed automatically.

• Print Test Pattern 1

  You can print gradation correction sheet 1, and specify the adjustment value for the gradation of bright areas.

• Print Test Pattern 2

  You can print gradation correction sheet 2, and specify the adjustment value for the gradation of medium areas.

• Reset Setting

  You can reset the gradation correction value to default.

You can adjust the starting position of the printing page.

• Print Test Sheet

  You can print the registration test sheet.

  Only the installed trays appear on the display panel.

  Default: [Tray 1]

  • Tray 1

  • Tray 2

  • Bypass Tray

  • Duplex Unit

• Adjustment

  You can select the start position for printing on a page.

  Only the installed trays appear on the display panel.

  • Horizontal: Tray 1

  • Horizontal: Tray 2

  • Horizontal: Bypass Tray

  • Horizontal: Back Side

  • Vertical: Tray 1

  • Vertical: Tray 2

  • Vertical: Bypass Tray

  • Vertical: Back Side

This mode adjusts levels of toner color overlap. If characters or lines blur, setting priority on text may make them clearer. Under normal conditions, set priority on photo.

Default: [Photo Priority]

• Text Priority

• Photo Priority