Viewing the Gradation Correction Sheet

K (black) correction values

Used to adjust the color printed when only black toner is used. The currently set correction value is printed in red.

M (magenta) correction values

Used to adjust the color printed when only magenta toner is used. The currently set correction value is printed in red.

C (cyan)/Y (yellow) correction values

Used to correct the colors printed when cyan and yellow are used. For C/Y (cyan/yellow), the correction value is determined based on combinations of these two colors, although panel settings are configured for each color.

Setting value

The value displayed is the one currently set when the gradation correction sheet is printed. This value corresponds to the value set on the control panel.