Skip header
ManualsContentsPreviousNextHelp

Adjusting the Color Registration

This section describes automatic color adjustment.

After moving the printer, printing on thick paper, or printing repeatedly for some time, color degradation may occur. By performing automatic color adjustment, you can restore optimum print quality.

  1. Press the [Menu] key.

    Control panel illustration

  2. Press the [Down arrow key ] or [Up arrow key ] key to select [Maintenance], and then press the [OK] key.

    Operation panel screen illustration

  3. Press the [Down arrow key ] or [Up arrow key ] key to select [Quality Maintenance], and then press the [OK] key.

    Operation panel screen illustration

  4. Press the [Down arrow key ] or [Up arrow key ] key to select [Color Registration], and then press the [OK] key.

    Operation panel screen illustration

  5. Select [Auto Adjust], and then Press the [OK] key.

    Operation panel screen illustration

  6. Press [OK].

    Automatic color adjustment begins.

    Automatic color adjustment takes about 30 seconds.

    A confirmation message appears when the adjustment is complete. Press [Exit].

  7. Press the [Menu] key to return to the initial screen.