Skip header
ManualsContentsPreviousNextHelp

Top Page > Hardware Guide > Loading Paper > Supported Paper for Each Tray > Bypass Tray

Bypass Tray

Paper types

Plain Paper, Middle Thick, Thick Paper 1, Thick Paper 2, Thick Paper 3, Thin Paper, Letterhead, Label Paper, Coated Paper (Glossy), Coated Paper(Glossy:Thick), Coated Paper (Matted), Coated Paper(Matted:Thick), Cardstock, Special Paper 1, Special Paper 2, Special Paper 3, Bond Paper, Preprinted Paper, Color Paper, Recycled Paper, Envelope

Paper sizes requiring manual settings

The following sizes are supported, but they must be selected using the control panel. For details about paper size settings, see "Specifying standard size paper for bypass tray".

A4Portrait, A5Portrait, A6Portrait, B5 JISPortrait, B6 JISPortrait, 8 1/2 " × 14 " (Legal)Portrait, 8 1/2 " × 13 " (Foolscap)Portrait, 8 1/2 " × 11 " (Letter)Portrait, 8 1/4 " × 13 " (Folio)Portrait, 8 " × 13 " (F/GL)Portrait, 7 1/4 " × 10 1/2 " (Executive)Portrait, 5 1/2 " × 8 1/2 " (Half Letter)Portrait, 4 1/8 " × 9 1/2 " (Com 10)Portrait, 3 7/8 " × 7 1/2 " (Monarch)Portrait, C5 Env.Portrait, C6 Env.Portrait, DL Env.Portrait,16KPortrait, Custom Size

Custom paper size

The following custom sizes are supported, but they must be selected using the control panel. For details about custom size paper settings, see " Specifying custom size paper for the bypass tray".

  • Approximately 64 - 216 mm (2.52 - 8.50 inches) in width

  • Approximately 125 - 1260 mm (4.93 - 49.60 inches) in length

Paper weight

60 to 220 g/m2 (16 to 59 lb.)

Paper capacity

100 sheets (80 g/m2, 20 lb.)

Do not load the paper so that the top of the stack exceeds the paper guides on the bypass tray.

Note

Reference

TopPreviousNext
Copyright (C) 2010