Status Messages (in alphabetical order)

The printer is updating the @Remote certificate.

The printer is calibrating the color. Wait a while.

The printer is in Energy Saver mode. Press any key to recover to the normal mode.

In Hex Dump mode, the printer receives data in hexadecimal format. Turn off the printer after printing, and then turn back on.

All jobs are suspended. Turn off the printer, and turn it on again to recover.

The printer is offline and cannot print.

This message may appear for a few seconds. It means the printer is initializing, replenishing toner, or executing maintenance operations. Wait a while.

The printer is printing. Wait a while.

Printing is suspended. To resume printing, press the [Suspend/Resume] key.

This is the default ready message. The printer is ready for use. No action is required.

The printer is resetting the print job. Wait a while.

The printer is applying the changes made to its settings. Wait a while.

The printer is waiting for the next data to print. Wait a while.