Skip header
 

Top Page > Copy and Document Server Reference > Basic Copying > Copying from the Bypass Tray > Copying onto OHP Transparencies or Thin Paper

Copying onto OHP Transparencies or Thin Paper

When copying onto OHP transparencies or thin paper, select the type and size of paper.

Important

  • We recommend that you use specified OHP transparencies.

  • Do not use color OHP transparencies that are coated with materials that might melt.

  • OHP transparencies must be loaded face down in the tray.

  • When copying onto OHP transparencies, remove copied sheets one by one.

1Press [Bypass], and then press the [Sharp] key.

2Press [Paper Type].

3Select [OHP (Transparency)] or [Thin Paper], and then press [OK].

Operation panel screen illustration

4Specify the paper size.

5Press [OK].

6Place the originals, and then press the [Start] key.

Note

  • Printing on special paper such as OHP transparencies and thin paper may be slower than printing on plain paper.

  • To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.

  • Load OHP transparencies one by one if they jam when loaded together.