Cover Sheet

Using this function, you can insert cover sheet/back cover sheet fed from a different tray to that of the main paper, and print on them.

To use this function, Collate must be set. Rotating Collate function is disabled.

You can print the first page of the document on the sheet for the cover page.

Front Cover sheet

Prints the first page of the document on the sheet for the cover page.

Print on one side
Prints on one side of the cover sheet only.
Print on both sides
Prints on both sides of the cover sheet when duplex printing is selected.
- Cover sheet printed on both sides
- Cover sheet printed on one side
Blank
- When printing one side
- When printing both sides

Front and Back Cover

Prints the first and last pages of the document as the cover pages.

If [Auto Tray Select] is selected in the [Input Tray:] list for the body paper, the paper will be delivered from a tray containing paper in the orientation. Therefore, if the cover paper is set to the orientation, the orientation of the output cover and body will be different.
The cover sheet/back cover sheet should be the same size and orientation as the body paper.
The same paper feed tray can be set for the body of the document and the cover sheet/back cover sheet.
When loading a cover sheet/back cover sheet in the tray, set the relevant paper size.
The cover sheet/back cover sheet can not be used when slip sheet is specified.
For printing methods, see the printer driver Help.